Video blogpost: How to clean the gravity nozzle strainer?
It is important to maintain the refuelling equipment. The requirements in CAP437 edition 8, chapter 8 reads: fuel delivery nozzles are to be inspected for general condition, cleanliness and correct operation to ensure correct lock off and no leakages. Helifuel have produced a short video guide on how to clean the gravity nozzle strainer. […]
Blogpost: Where should a helicopter refuelling system be located on the MOU, ship or fixed platform?
A helicopter refuelling system will as a minimum consist of a dispensing unit, a pump unit and fuel tanks normally stored on a skid with incorporated bund. The fluid type is Jet A-1 and the flash point is 38deg C. A typical question we receive and a very important one is where can or […]
Video blogpost: How to take samples from JET A1 Tanks?
In accordance with CAP437 and NOROG, it is required to take regular fuel samples from the JET A-1 Tanks. Helifuel have a produced a short video guide for this fuel sampling procedure. If you have any questions or require further guidance, please do not hesitate to contact Helifuel AS – The fuelling experts! […]