Dispensing unit

The Helifuel dispenser unit is a fully enclosed 316 stainless steel equipment skid. Included within the skid is the dispensing equipment necessary to ensure that Jet-A1 fuel is delivered safely to the helicopter. The skid contains equipment for filtration, flow measurement dispensing fuel and the control, safety and monitoring instrumentation. The dispenser unit is designed for use on offshore installations, rigs, ships and other vessels.
The dispensing unit can be located near the helideck or on a platform incorporated with the helideck.

Note

STEP/DWG files for all standard units are available upon request for easy and simple integration into your existing CAD systems.

1
1

Dispensing unit

1
1

Dispensing unit

1
1

Dispensing unit

Advantages

TYPE APPROVED

Approved and certified by ABS & DNV-GL under Helifuel’s type approvals.

COMPLIANCE

CAP 437 compliant innovative high quality technical solutions.

LOW-PROFILE

Low-profile designed for installation close to the helideck in the obstacle free or limited obstacle sectors.

MODULAR & EXPANDABLE

Modular and expandable (e.g. bolt on sample cabinet or an elevation kit that raises the unit from approximately 1400 to 2000mm when located outside the height restricted sector, to facilitate the operator.

PROVEN EQUIPMENT

Helifuel equipment is safe, reliable and proven in the field since 1996.

FILTRATION

Latest filtration technology.

MATERIALS

High grade material selection to ensure reduced life cycle maintenance cost.

PROTECTION

All items are located inside the cabinet and are protected against UV radiation, particles, water, environmental conditions.

ERGONOMIC

Ergonomic user friendly design using front and side door. Side roller door: All instruments and sample points for regular use are easily accessible. Front roller door: Hose reel and bonding reel operations.

LABELS

Professionally labelled including operating instructions.

SAMPLING

Weather protected sampling points.

ELECTRICAL CABLES

All electric cables are installed mechanical completion checked and tested.

FLUSHING

Flushed to NAS 8 or better.

Available models from standard product portfolio

Unit NamePart NumberFlow meter (Material Selection)Hose Reel – Manual or PneumaticInternal IlluminationClosed Circuit Sampler, Pressure SwitchDimensionsWeight
Dispenser Unit, EconomyDT1-HF-L-0001Ductile IronManualL: 2174 mm
W:1280 mm
H:1598 mm
Dry: 909 kg
OP: 965 kg
Dispenser Unit, BusinessDT1-HF-L-0002316SSManualL: 2174 mm
W: 1280 mm
H: 1598 mm
Dry: 925 kg
OP: 976 kg
Dispenser Unit, Business +DT1-HF-L-0003316SSPneumaticL: 2174 mm
W: 1280 mm
H: 1598 mm
Dry: 950 kg
OP: 1001 kg